|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 5.
open instrument panel (page 4-244) using multimeter set at 30 vdc, put red
probe on horn circuit breaker (4) terminal for wire no. 096, and black probe to
good ground.
If meter reads no voltage, replace circuit breaker (page 4-304).
Step 6.
Go to shutdown switch (5) using multimeter set at 30 vdc, put red probe on
terminal for wire no. 096, and black probe to good ground.
If meter reads no voltage, close instrument panel (page 4-244), install
right side panel and close right side of hood (TM 9-2320-270-10), and
notify direct support maintenance.
TA239632
3-43
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |