ENGINE WILL NOT SHUT DOWN CONTINUED.

TM 9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

13. ENGINE WILL NOT SHUT DOWN CONTINUED.

At engine stop switch (1) using multimeter set at 30 vdc, put red probe on

Step 7.

terminal for wire no. 019, and black probe to good ground. Have assistant

turn on shutdown switch.

If meter reads no voltage, replace engine stop switch (page 4-249).

Close instrument panel (page 4-244) and go to engine bulkhead connector (2)

Step 8.

and disconnect. Using multimeter set at 30 vdc, put red probe on pin F and black

probe to good ground. Have assistant turn on engine stop switch.

If meter reads no voltage, plug in engine bulkhead connector (2),

install right side panel and close right side of hood (TM 9-2320-

270-10), and notify direct support maintenance.

TA239633

3-44