|
|
TM 9-2320-269-34-1
INTERMEDIATE DIFFERENTIAL
This task covers:
a. Removal (page 2-888)
d. Inspection/Replacement (page 2-891)
b. Disassembly (page 2-889)
e. Assembly (page 2-892)
c.
Cleaning (page 2-890)
f.
Installation (page 2-895)
INITIAL SETUP
Tools
Materials Parts
Block, wood
Gasket, intermediate differential case
Caliper, micrometer, OD
Lockwasher, hose bracket (two required)
Hammer, ball-peen, machinist's, 3-lb
Lockwasher, intermediate differential case
Handle, ratchet, 112-inch drive
(five required)
Handle, ratchet, 1-inch drive
Lockwasher differential carrier
Indicator, dial
(three required)
Pliers, snapring
Rags, wiping (item 42, appendix B)
Press, arbor, hand-operated
Sealant, gasket (item 44, appendix B)
Puller, bearing
Solvent, dry-cleaning (item 49, appendix B)
Punch, drive-pin, 318-inch
Spacer, idler shaft (as needed)
Socket, 1/2-inch drive, 9/16-inch
Socket, 3/4-inch drive, 1 5/8-inch
Personnel Required
Socket, 1-inch drive, 3 1/8-inch
One
Wrench, adjustable, 12-inch
Wrench, crowfoot, attachment,
Equipment Condition
1/2-inch drive, 9/16-inch
Wrench, open-end, 9/16-inch
Interaxle differential removed (page 2-875).
Wrench, torque, 1/2-inch drive,
Power divider lockout assembly removed
0 - 175 ft-lb capacity
Wrench, torque multiplier, 3/4-inch
drive, 0 - 600 ft-lb capacity
2-887
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |