 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
INTERAXLE DIFFERENTIAL
This task covers:
a. Removal (page 2-876)
d. Inspection/Replacement (page 2-880)
b. Disassembly (page 2-878)
e. Assembly (page 2-881)
c.
Cleaning (page 2-880)
f.
Installation (page 2-885)
INITIAL SETUP
Tools
Material/Parts
Bar, pry, 24-inch
Bushing, case
Block, wood (three required)
Gasket, housing
Caliper, micrometer, OD
Lubricant, rear axle (item 28, appendix B)
Chisel, cape, hand, 1/4-inch,
Pack, shim
5 1/2-inch
Plates, lock, upper and lower bearing caps
Face, inserted hammer, soft-plastic
(two required)
Gage, thickness
Rags, wiping (item 42, appendix B)
Hammer, machinist's ball-peen, 2-lb
Seal, oil, housing
Handle, ratchet, 3/8-inch drive
Solvent, dry-cleaning (item 49, appendix B)
Handle, ratchet, 1/2-inch drive
Washer, fiber
Handle, ratchet, 3/4-inch drive
Washers, thrust, two pinion gears
Holder, inserted hammer-face
(four required)
Jack, hydraulic hand
Washers, thrust, two side gears
Knife, putty
(three required)
Pail, utility, 2-gallon
Pliers, slip-joint, angle-nose
Personnel Required
Press, arbor, hand-operated
Puller, bearing
One
Punch, drive-pin, 3/8-inch
Screwdriver, flat-tip, 114-inch,
4-inch blade
Scribe, machinist's
Socket, 318-inch drive, 9/16-inch
Socket, 112-inch drive, 9116-inch
Socket, 112-inch drive, 314-inch
Socket, 3/4-inch drive, 1 13/16-inch
Wrench, torque, 1/2-inch drive,
0 - 200 ft-lb capacity
Wrench, torque, multiplier, 314-inch
drive, 0-1,000 ft-lb capacity
2-875
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals