|
|
TM 9-2320-269-34-1
TRANSMISSION GOVERNOR ASSEMBLY
This task covers:
a. Removal (page 2-810)
c. Inspection/Replacement (page 2-811)
b. Cleaning (page 2-810)
d. Installation (page 2-812)
INITIAL SETUP
Tools
Materials/Parts
Compressor, reciprocating air,
Gasket, governor cover
power driven
Solvent, drycleaning (item 49, appendix B)
Goggles, safety
Gun, air blow
Personnel Required
Handle, ratchet, 1/2-inch drive
Hose, air compressor
One
Pan, drain
Socket, 1/2-inch drive, 1/2-inch
Stone, soft
Wrench, torque, 112-inch drive,
0 - 150 ft-lb capacity
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Governor cover (1)
Screw (2) and three
a.
Place drain pan
underneath.
screws (3)
b.
Using 1/2-inch socket and ratchet
handle with 1/2-inch drive, unscrew
and take out.
c.
Allow fluid to drain and get rid of
2.
Rear cover
Clamp and cable (5),
a.
Take off.
assembly (4)
spacer (6), governor
b.
Get rid of gasket (7).
cover (1), and
gasket (7)
3.
Governor
Take out.
assembly (8)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
2-810
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |