|
|
TM 9-2320-269-34-1
GEAR UNIT AND MAIN SHAFT
This task covers:
a. Disassembly (page 2-760)
c. Inspection/Replacement/Repair
b. Cleaning (page 2-762)
d. Assembly (page 2-764)
INITIAL SETUP
Tools
Materials/Parts
Bit, drill twist, 1/4-inch
Cloth, crocus (item 7, appendix B)
Compressor, reciprocating air,
Grease, oil soluble (item 21, appendix B)
power driven
Solvent, drycleaning (item 49, appendix B)
Drill, electric, portable
Goggles, safety
Personnel Required
Gun, air blow
Hammer, ball-peen, machinist's
One
Hose, air compressor
Installer, lubrication orifice plug
Equipment Condition
Pliers, snapring
Screwdriver, flat-tip, 3/16-inch
Gear unit removed (page 2-650).
Screwdriver, flat-tip, 3/8-inch
Screwdriver, flat-tip, 1/4-inch
Stone, soft
Wire, soft, 12-inch
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
1.
Gear unit and main
Sun gear thrust
Take off.
shaft (1)
washers (2) and (3)
2.
Front sun gear (4)
Take out.
3.
Front sun gear (4)
Sun gear thrust
Take off.
washer (5)
4.
Front planetary ring
Front carrier
Lift off.
gear (6)
assembly (7)
5.
Front carrier
Planetary carrier
Take off.
assembly (7)
thrust washer (8)
6.
Gear unit and main
Center sun gear
Take out.
shaft (1)
shaft (9)
2-760
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |