 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
RELAY BOX
This task covers:
a. Removal (page 2-603)
d. Inspection/Replacement (page 2-616)
b. Disassembly (page 2-608)
e. Assembly(page 2-620)
c. Cleaning (page 2-615)
f. Installation (page 2-627)
INITIAL SETUP
Tools
Materials/Parts - Continued
Battery, 12-volt
Lockwasher, relay box bottom bracket-to-
Brush, parts cleaning
relay box
Chisel, cold, hand, 1/2-inch
Lockwasher, solenoid and relay-to-relay
File, hand, 6-inch
box (ten required)
Gun, soldering
Lockwasher, solenoid, right and left front
Hammer, ball-peen, machinist's, 2-oz
terminals (six required)
Handle, ratchet, 3/8-inch drive
Lockwasher, right and left terminals
(six required)
Screwdriver, flat-tip, 3/16-inch,
Nut, self-locking, firewall brace
Screwdriver, flat-tip, 3/8-inch
Rags, wiping (item 42, appendix B)
Socket, 3/8-inch drive, 7/16-inch
Solder (item 46, appendix B)
Test leads
Solvent, drycleaning (item 49, appendix B)
Wrench, box-end, 318-inch
Wrench, box-end, 7/16-inch
Personnel Required
Wrench, box-end, 1/2-inch
Wrench, open-end, 5/16-inch
One
Materials/Parts
Equipment Condition
Lockwasher, relay box bottom bracket-
Left side hood open
to-relay box (two required)
(TM 9-2320-269-20-2).
Lockwasher, relay box bottom bracket-
Battery ground cable disconnected
to-relay splash panel
(TM 9-2320-269-20-1).
Lockwasher, relay box side bracket-to-
relay box
2-602
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals