|
|
TM 9-2320-269-34-1
RELAY BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
54.
Relay box (1)
Three wire
Put in.
clamps (2)
55
Three wire
Three nuts (3)
a. Screw on.
clamps (2)
b. Tighten using 1/2-inch chisel and two
ounce ball-peen hammer to drive clock-
wise.
56
Top solenoid (4)
Two white ground
a. Screw on, and tighten using 3/8-inch
and center solenoid:
wires (7), new
box wrench.
(5) right front
lockwashers (8),
b. Route into place behind solenoid (4) or
terminal (6)
and nuts (9)
(5) so wire terminal is at mounting hole.
57
Top relay (10) and
White ground
center right
wire (12)
solder on.
TA238361
2-620
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |