|
|
TM 9-2320-269-34-1
GOVERNOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY/ADJUSTMENT - CONTINUED
104. Two governor bushing
Two new lock-
Using 1/8-inch flat-tip screwdriver, bend
screws (1)
plates (2)
up against screws (1).
105. Flyweight (3)
Adjusting pin (4)
Put in.
106.
New governor bolt
a. Turn flyweight (3), and put bolt (5),
(5), new lockwasher
with washer (6) through.
(6), washer (7),
b. Screw on nut (8).
and nut (8)
107. Adjusting pin (4)
Guide (10) and gov-
a.
Hold guide (9) against pin (4).
and governor
ernor lever (11)
b.
Hook lever (10) into guide (9), and
link (9)
lift into link (8).
108. Governor link (9)
Pin (12)
Put through.
109. Pin (12)
New cotter pin (13)
Using diagonal cutting pliers, put through
and bend over.
2-356
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |