|
|
TM 9-2320-269-34-1
GOVERNOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY/ADJUSTMENT
99. Camshaft (10)
Flyweight (17)
Put on.
100.
Shim (18) and gov-
a. Put in shim (18).
ernor nut (19)
b. With aid of assistant, screw on nut 37-
43 ft-lb (50.2 - 58.3 N m) of torque us-
ing 15116-inch flat-tip screwdriver bit,
3-inch extension, torque wrench with
112-inch drive, and drive flange hold-
ing wrench.
101.
Flyweight (17) and
a. Turn flyweight (17) side-to-side on
shim (18)
camshaft (10).
b. If flyweight (17) has too much play,
repeat step 23 and add shims (18).
c. Repeat steps 98 and 24.
102. Flyweight (17)
Governor
Put on.
bushing (20)
103. Governor
Two new lock plates
Using 10-mm open-end wrench, screw in
bushing (20)
(21) and screws (22)
and tighten.
2-355
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |