Click here to make tpub.com your Home Page

Page Title: Table 2-7. Troubleshooting of Battery Power Supply PP-6607/VVG-1 (A78) - Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-1240-369-34
Table 2-7. Troubleshooting of Battery Power Supply PP-6607/VVG-1 (A78) - Continued
Item
No.
Malfunction
Probable cause
Corrective action
signals at pins 6 and 5 of A78A4 card.
If signals compare with figure 2-15,
replace A78A4 card and continue with
step 25. If signals do not compare with
figure 2-15, return unit to depot for
repair.
18.
Using multimeter, measure voltage at
pin 6 of A78A3 card. If multimeter
indicates the same voltage as for step
10, replace A78A3 card, and continue
with step 25. If multimeter does not
indicate the same voltage as for step
10, continue with step 19.
19.
Remove A78A2 card (para 3-7b).
20.
Install extender card (15, table 2-2).
21.
Insert A78A2 card into extender card
connector.
22.
Perform step 2 and continue with step
23.
23.
Using multimeter, measure voltage at
pin 8 of A78A2 card. If multimeter
indicates the same voltage as for step
10, return A78 unit to depot for repair.
If multimeter does not indicate the
same voltage as for step 10, continue
with step 24.
24.
Using multimeter, measure voltage at
pins 21 and 22 of A78A2 card. If
multimeter indicates the same voltage
as for step 10), replace A78A2 card
and continue with step 25. If
multimeter does not indicate the same
voltage as for step 10, return unit to
depot for repair.
25.
Remove extender cards.
26.
Install cards (para 3-7b).
27.
Remove unit from hot mock-up.
28.
Purge unit (TM 9-2350-230-12).
3
BAT LOW indicator
Storage battery assembly A78B1,
1
Install failed unit in hot mock-up.
illuminates (unit A79).
or battery charge sensor circuit
2.
Charge storage battery assembly
card assembly A78A3.
(para 2-13) If malfunction is corrected
continue with step 15. If malfunction is
not corrected continue with step 3.
3.
Replace storage battery assembly
4.
Perform portion of BIT (para 4-2a)
which will duplicate malfunction. If
malfunction is corrected, continue with
step 12. If malfunction is not corrected
continue with step 8.
5.
Remove A78A3 card (para 3-7b).
6.
Install extender card (13. table 2-2).
2-29

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business