TOGGLE SWITCH INSTALLATION

TM 9-1240-322-34&P

T O G G L E SWITCH INSTALLATION

TOOLS: #2 cross tip screwdriver (Phillips type)

9/ 16" open end wrench

Soldering iron

Solder (item 5, App. A)

SUPPLIES:

Sealing compound (item 4, App. A)

PERSONNEL: One

REFERENCES: JPG 41C for:

Using sealing compound

EQUIPMENT CONDITION: Infinity sight on work bench

FRAME 1

Procedure

Step

Place keyed washer (1) and seal (2) on toggle switch (3).

Install toggle switch (3) in hole of cover (4) and line up key of keyed washer (1) with

groove in cover (4).

Using wrench, install washer (5) and nut (6) while holding toggle switch (3) in place.

Using soldering iron, solder two wires (tagged during removal procedure) to terminals of

toggle switch (3) (JPG).

Place cover (4) on infinity sight housing (7) and line up both flat surfaces.

Put small amount of sealing compound on threads of six screws (8) and cover (4)

(JPG).

Using screwdriver, install six washers (9) and six screws (8) into cover (4).

NOTE

FOLLOW-ON MAINTENANCE

Do checkout procedure (Vol I, para 2-2).

END OF TASK

Vol II

4-26