LAMP ASSEMBLY ASSEMBLY

TM 9-1240-322-34&P

TOOLS: #2 cross tip screwdriver (Phillips type)

53/64" tubular spanner wrench

Soldering iron

Solder (item 5, App. A)

SUPPLIES:

Sealing compound (item 4, App. A)

PERSONNEL: One

REFERENCES: JPG 41C for: Soldering wires

Using sealing compound

EQUIPMENT CONDITION: Infinity sight on work bench

FRAME 1

Procedure

Step

Thread two wires (1) through lamp assembly housing (2).

Put small amount of sealing compound on threads of three screws (3) and lamp

assembly housing (2) (JPG).

While holding lamp assembly housing (2) in place on infinity sight housing (4), using

screwdriver, install three washers (5) and three screws (3).

Using soldering iron, solder wires (1) (tagged during disassembly procedure) to terminal

(6) (JPG). Align key on terminal (6) with key slot in lamp assembly housing (2). Push

terminal (6) into lamp assembly housing (2). Make sure terminal seats on shoulder.

Using wrench, install ring (7) into lamp assembly housing (2).

Using fingers, install lamp (8), gasket (9) and lampholder assembly (10) into lamp

assembly housing (2).

NOTE

FOLLOW-ON MAINTENANCE

Do checkout procedure (Vol I, para 2-2).

END OF TASK

4-10

Vol II