|
|
TM 9-1220-231-34&P
FIRE CONTROL LEVEL DISASSEMBLY
TOOLS: 0.055 to 0.060 adjustable face spanner wrench
4 oz ball peen hammer
1/16" drive pin punch
Machinist's scriber
0.055 jeweler's screwdriver
1/4" flat tip screwdriver
PERSONNEL: One
EQUIPMENT CONDITION: Fire control level on work bench
PRELIMINARY PROCEDURES: Remove fire control level from ballistic drive (para 4-13)
Procedure
Step
Using spanner wrench, remove threaded ring (1) from housing (2).
1.
2.
Remove eccentric (3) from end of housing (2).
3.
Slide level vial tube (4) through cover (5) and housing (2).
4.
Remove cover (5) from housing (2).
NOTE
Do step 5 only if pin (6) is damaged.
Using hammer and punch, drive pin (6) from housing (2).
5.
END OF TASK
Vol II
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |