RAMP AREA

Seq .

Seq.

No.

Item and Procedure

No.

Item and Procedur e

3.4

Right fuel and cross feed valves and hoses for condition and

3.14

Aft transmission input shaft adapter and plates for security,

security.

cracks, and damage. Hardware for security.

3.5

Inspect P3 (RH) drain cartr idge plastic tube for cracks.

3.15

Aft synch shafts for chafing, scoring, and damage. Adapters and

(WITH 7 4 )

plates for cracks and security of hardware. Shock mounts for

security and freedom of movement. Rubber for cuts or cracks,

3.6

Maintenance panel for tripped chip detector, debris screen or

unbonding between rubber and metal parts, and evidence of

overtemp bite indicators. Hydraulic reservoir level indicators

contact with suppor t brackets. Shock mount suppor t bushings

(UTILITY, NO. 1 and NO. 2 FLT CONTR) for proper fluid levels.

for wear. Bearing for evidence of overheating. Support bracket

for cracks, bending, and twisting. Retainer nut for presence of

3.7

Hydraulic filler module for condition and selector valve in off

cotter pin.

position.

3.16

Flight control bellcranks and connecting links for condition and

3.8

Utility hydraulic hand pump for proper operation.

proper installation.

3.9

Emergency utility pressure valve and utility reservoir

3.17

Fire bottles for pressure and wire connectors. System tubing for

depressurization valve for handle valve at NORMAL.

security and condition.

3.10

APU star t accumulator for proper pressure.

3.18

Utility hydraulic pressure control module for leaks and security of

components. Filters for extended warning indicator.

3.11

APU star t module for condition and proper pressure.

3.19

Utility hydraulic return module for leaks and security of

3.12

Aft transmission drip pan for trapped fluids.

components. Filter contamination and pump fault indicators (2)

NOTE

for extended warning indicators.

To prevent overfilling transmission, check oil level 30 minutes

3.20

Aft transmission and pressure switch and adjacent area for

after shutdown.

security of components and hardware, leaks, and damage. The

two main generator housings for cracks, indication of leakage,

3.13

Aft transmission sight gage for proper oil level.

and signs of overheating.

"FOD REMINDER"

Check wo rk area for tools and par ts after completion o f maintenance and insp ection.

TM 55-1520-240-PMD