RIGHT FUSELAGE AREA

Seq .

Seq.

No.

Item and Procedure

No.

Item and Procedur e

3.30

APU installation for fuel and oil leaks. Mounts for secur ity and

damage. Air inlet and exhaust for obstructions. Tail pipe for

proper clearances with closure plate. Drain lines for obstr uctions.

When ambient temperature is below 32 F or 0 C, pay

Wir ing and engine harness for chafing, loose or frayed wires,

special attention for cracks around the 3 to 9 O'clock

and proper support. Connectors for security. Oil tank sight gage

position of the main generators.

for proper oil level. Generator, air duct, and screen for secur ity

and damage. Generator wiring for security and chafing. Current

3.21

Aft transmission main lube filter for extended war ning indicator.

transformers for security and damage.

3.22

Aft transmission oil cooler for leaks, clogged or damaged cores,

3.31

Emergency exit light for proper stowage and condition.

and security. Cooling fan and duct for security, cracks, and

damage.

3.32

Jettisonable cargo door release handle for locked position and

proper safety.

3.23

Aft transmission access door fasteners for proper operation and

security.

3.33

APU exhaust outlet for security and signs of overheating.

3.24

APU motor/pump for leaks. Hydraulic hoses for chafing and

3.34

Aft navigation and NVG lights for condition.

proper suppor t.

RIGHT FUSELAGE AREA

3.25

Troop alar m bell and lights for condition and security.

4.1

Hydraulic ground test connection flight control system No. 2,

3.26

APU emergency shut off valve to open position.

utility system for leaks, dust caps and panel for security.

3.27

Left fuel and cross feed valves and hoses for condition and

4.2

Fluid drain lines for damage and obstructions.

security.

4.3

Aft landing gear str ut for leaks, cleanliness of exposed piston, and

3.28

Inspect (LH) P3 drain car tridge plastic tube for cracks. (WITH

)

normal extension (visual) and mounting structure for condition.

3.29

Portable fire extinguisher for installation and serviceability.

"FOD REMINDER"

Check wo rk area for tools and par ts after completion o f maintenance and insp ection.

TM 55-1520-240-PMD