CABIN AREA

Seq .

Seq.

No.

Item and Procedure

No.

Item and Procedur e

1.27

Fire extinguisher for installation and ser viceability.

2.9

Hoist control grip and cable for damage, chafing, secur ity of

connector, and proper storage.

1.28

Pilot seat and seat belt for serviceability.

2.10

Hand crank and cargo hook loading pole for proper stowage and

NOTE

condition.

To prevent overfilling transmission, check oil level 30 minutes

2.11

Center cargo hook for specified air pressure. Hydraulic lines for

after shutdown.

leaks and security. Electr ical connector for proper installation.

1.29

Forward transmission sight gage for proper oil level.

Release cams for proper position and latching, D handle properly

stowed. (WITHOUT 35 )

CABIN AREA

2.12

Check fuel tank and all fuel manifold lines for leakage.

2.1

Troop alar m bell and lights for condition and security.

2.13

Installed seats for condition and proper installation.

2.2

Portable fire extinguisher for installation and serviceability.

2.14

EAPS control boxes (L/R) for security, conditions, and electrical

2.3

Cargo winch hook (if installed) for proper installation and

connectors for proper installation.

condition.

2.15

On helicopters (With 74 ), DECU (L/R) side electrical wiring and

2.4

Cabin door for proper operation and latching.

connectors for security, evidence of chafing and proper support.

Mounting structure for cracks and loose or missing hardware.

2.5

Transformer-rectifier air inlets (L/R) sides for obstructions.

RAMP AREA

2.6

Emergency exit lights (L/R) for proper stowage and condition.

3.1

Ramp sequence valve for condition.

2.7

Emergency escape axe stowed.

3.2

Ramp control valve for condition.

2.8

First aid kits (6 places) for installation and serviceability. Cabin

windows for security, cracks, and cleanliness. Troop seats and

3.3

Power steering swivel lock module for leaks, condition and

seat belts for proper installation and serviceability.

security. Accumulator for proper pressure.

"FOD REMINDER"

Check wo rk area for tools and par ts after completion o f maintenance and insp ection.

TM 55-1520-240-PMD