Table 3-1. Symptom Index

TM 5-6350-275-24&P

This manual cannot list all possible malfunctions that may occur or all tests, inspections, and corrective actions. If a

malfunction is not listed (except when malfunction and cause are obvious), or is not corrected by listed corrective

actions, notify the next higher level of maintenance.

Table 3-1 contains an alphabetical listing and location of possible malfunctions that may occur in the ICIDS.

Table 3-1. Symptom Index

ICIDS Equipment

Troubleshooting Procedure (Table)

PRIMARY MONITOR CONSOLE/RSM

Table 3-2

Control Processing Unit (CPU)

Cannot communicate with multiplexers ....................................................................................................... 3-2 (1)

Cannot communicate with single/multiple multiplexers ............................................................................... 3-2 (2)

Cannot communicate with single/multiple Remote Area Data Collectors (1-8, 9-16, etc.) ............................. 3-2 (3)

Does not switch responsibility to RSM upon failure ..................................................................................... 3-2 (4)

PMC Monochrome Monitor screen is dark .................................................................................................. 3-2 (5)

Cannot download or upload data to Tape Streamer .................................................................................... 3-2 (6)

B39 Keyboard Inoperative .......................................................................................................................... 3-2 (7)

Operator Workstation

Computer Processing Unit will not power up ............................................................................................... 3-2 (8)

Cannot communication with CPU ............................................................................................................... 3-2 (9)

Keyboard inoperative ................................................................................................................................ 3-2 (10)

Color Monitor screen is dark ..................................................................................................................... 3-2 (11)

Printer

Does not print ........................................................................................................................................... 3-2 (12)

RSM

RSM cannot communicate with PMC ........................................................................................................ 3-2 (13)

REMOTE AREA DATA COLLECTOR (RADC)

Table 3-3

STARGATE 1000, 5000 PWA

Does not communicate with CPU ................................................................................................................ 3-3 (1)

MOD II Modem PWA

Does not communicate with CPU ................................................................................................................ 3-3 (1)

DAS Module

Does not communicate with CPU ................................................................................................................ 3-3 (1)

Leda Flex PWA

Failure indicated at operator workstation ..................................................................................................... 3-3 (2)

Leda Flex Termination PWA

Failure indicated at operator workstation ..................................................................................................... 3-3 (3)

Audio Assessment Controller

Cannot turn on microphone(s) ..................................................................................................................... 3-3 (4)

DES Module

Will not allow communications processing .................................................................................................. 3-3 (5)

SubRADC (LEDA) with Power Supply

Table 34

Leda Flex PWA failure

Failure Indicated at operator workstation' .................................................................................................... 3-4 (1)

Leda Flex Termination PWA failure

Failure indicated at operator workstation ..................................................................................................... 3-4 (2)

Power Supply, AC line loss failure

Failure indicated at operator workstation ..................................................................................................... 3-4 (3)

3-2