Figure 2-65. Zone Detail Page

TM 5-6350-275-10

Figure 2-65. Zone Detail Page

(3) If you control more than one zone record, the system will display a zone record list, Figure 2-64. Use the up

and down arrow keys to select the desired zone record and press [GO]. The zone detail page, Figure 2-65, will be

displayed.

2-34.1. MODIFYING THE ZONE DETAIL PAGE . Once a Zone Detail Page has been displayed, you can modify some

attributes of the record. You can modify the following fields of data:

a. ACCESS TIME. Access time is the time access to a zone will be granted, for example, if you enter 06:00 then

access is granted at 06:00 or later. Enter data for weekdays, weekends, and holidays.

(1) Use the [DELETE] key to remove the current value.

(2) Modify hours and minutes time must be separated by a colon.

(3) Press the [NEXT] key to move between fields.

b. SECURE TIME. Secure time is the time the zone must be placed in SECURE mode. If for example, you enter

18:00, then the zone must be placed in secure by 18:00 hours. If not, and the secure time has not been extended, an

alarm will be reported at the Operator Work Station.

(1) Use the [DELETE] key to remove the current value.

(2) Modify hours and minutes time must be separated by a colon.

(3) Press the [NEXT] key to move between fields.

c. WARNING TIME. Warning time is the number of minutes prior to when the zone must be placed in secure that

the system will remind the user of the impending secure time. The keypad will issue an audible tone.

(1) Use the [DELETE] key to remove the current value.

(2) Enter time in the range of 0 to 59 minutes, for example, 5.

2-101