Figure 2-57. List of Zone Users

TM 5-6350-275-10

d. ZONE USERs. Zone users are people who are authorized to place a zone in access or secure mode. To add,

modify or remove a zone user from the system perform the following:

NOTE

You must be in the F1Zone Records mode.

(1) Press the F2 [Modify] key from the Zone Record List. Use the up and down arrow keys to select the zone

record and press [GO].

Figure 2-57. List of Zone Users

(2) When the zone detail page is presented, press the [NEXT PAGE] key and the Zone User Page, Figure 2-57,

is presented. Press the F1 key to Add, F2 key to modify, or F3 key to remove a zone user.

(a) Adding a zone user. Press the F1 key and the system will prompt you to enter data concerning the

zone user. Enter data as follows:

(1) NAME. Enter the zone user's name and press the [NEXT] key.

(2) SSN. Enter the social security number without spaces or dashes. Press [GO]. The system will

prompt that the user does not exist. Press [GO] again. Or if the person already has a PIN and Access level assigned,

the system will pull the record from reconfiguration. Press [GO]

(3) PIN. If necessary, enter a 4 digit personal identification number. Press [NEXT].

(4) GRADE. Enter the grade. Up to 7 characters can be used. Press [NEXT].

(5) TELEPHONE. Enter up to a 12 digit telephone number. Press [GO].

2-93