Displaying SCADA Events

TM 5-6350-275-10

(e) [PV IN] relates to passback violations entering a zone where the card is presented on two occasions at

an entry without-being used at an exit, and [PV OUT] to those leaving a zone.

(f) [DR FCD] and [DR AJR] select events relating to a door being forced open and failing to be closed within

a defined time period.

(10) When you have made the selection(s) from the menu, press [NEXT] to proceed. The system prompts you

to select the zones required. You can. specify all zones by entering the * or identify a single zone by entering its name

or number or by using the cursor option. If you use the cursor option, you must press [GO] to confirm the selection.

Otherwise press [NEXT] or [GO]. If you use [NEXT], the prompt Portals appears, allowing you to specify the portals

whose events are required. You can again use the * to indicate all portals or specify a single portal by entering its

assigned number or by using the cursor. Press [GO] to create the display.

g. Displaying SCADA Events. In response to the menu containing the [STATUS], [ANALOG], and [ALL]

options, select the class of points required and press [NEXT]. The [STATUS] key selects only status points; the

[ANALOG] key, only analog points; and the [ALL] key, both classes of points.

(1) When you have identified the class of point, enter details of the time for which the archived data is required

in response to the prompts "From time" and "For". The cursor appears beside the "From time" prompt. Enter the time of

the first item of archived data to be displayed using one of the formats shown below.

Wed 9/9/87 21:31

Wed 9 sept 87 21:31

2 weeks ago or 2W

2 days ago or 2D

2 hours ago or 2H

NOTE

Plain text is optional and the time is based on a 24 hour clock.

(2) When you have specified the reference time, press [NEXT] and respond to the prompt "For" by entering

the time period for which data is required. Use one of the following formats. You can then enter the timebase into the

system by pressing [GO].

2 weeks or 2W

2 days or 2D

2 hours or 2H

(3) When the time base has been entered, the system issues the prompt Group(s). In response, either identify

the groups required and then press [NEXT], or use the cursor to select an RADC or a point from a current display, and

then press [GO]. Selecting an RADC produces a display of archived events for all of the RADC's points. Selecting a

point reveals only those which have been recorded for the point.

(4) If you choose not to use the cursor, press [NEXT] and respond to the prompt "Stn(s)" by identifying the

RADCs required. Either press [GO], to display a list of events for all points at these RADCs, or [NEXT]. Pressing [NEXT]

leads to the first of the six prompts shown below:

Prefix

Numeric

Suffix

Zone

2-45