Accessories (shipped inside control unit) (refer to fig. for location of items).

TM 43-0156

Step

Function

Mech

Insp

(8)

Fire Extinguisher. Lock fire extinguisher in

cont

bracket and secure with QQ-W-461 wire.

(9) Control Unit Openings.

(a) Seal openings with MIL-T-22085 tape. PPP-T-60,

type 4, 4-inch wide tape may be used as a substitute.

(b) Cap off the cable penetrations underneath the con-

trol unit with MIL-C-5501 caps.

with MIL-T-22085 tape. PPP-T-60 tape may be used

as a substitute.

c. Accessories (shipped inside control unit) (refer to fig.

B-3-1 for location of items).

(1) Conduit (24 x 4), 24 each.

(a) Coat the threaded end of the conduit with

MIL-C-16173, grade 4 preservative and allow to dry.

(b) Place the conduit in a PPP-B-601 box (27 x 18 x

24) fabricated in accordance with appendix D-1.

Refer to table B-3-3 for a list of materials.

Mark box to identify contents.

(2) Flexible Metal Fuel Hose, Universal (three, 1-inch

and one, 2-inch).

(a) Dip hoses in VV-L-800 preservative oil, allow to

drain, wrap hoses in MIL-B-121 barrier.

(b) Place into a PPP-B-636 fiberboard box (24-1/2 x 7

x 5). Seal box with PPP-T-76 tape. Mark box to

identify contents.

(3) Cables and Ground Wire.

(a) Cover exposed ends of electrical cables with

MIL-B-121 barrier. Secure barrier with PPP-T-60 tape.

(b) Coil cables and secure in four places with

MIL-B-121 barrier and PPP-T-60 tape.

wire in a PPP-B-601 box (24 x 24 x 24) fabricated

in accordance with appendix D-1. Refer to table

B-3-4 for list of materials. Mark box to identify contents.

Change 1

B-3-13