Louvered Air Intake. - TM-43-01560060

TM 43-0156

Step

Function

Mech

Insp

Louvered Air Intake.

cont

(1) Close louvers.

(2) Cover outside of louvered opening with barrier

(8135-00-282-0565) and two 3/4-inch plywood panels

(52-1/4 x 41-1/2) (5530-00-618-8073).

(3) Seal edges of plywood with tape (7510-00-916-9659).

NSN 7510-00-890-9875 may be used as a substitute.

(4) Remove one mounting bolt from each side of the

canopy.

(5) Place bolts into a bag fabricated from barrier

(8135-00-282-0565) (5 x 5) and heat seal or staple bag.

(6) Mark bag to indicate contents and secure to the inside

of the access door with tape (7510-00-916-9659).

NSN 7510-00-890-9875 may be used as a substitute.

(7) Coat the rubber door seals with silicone (6850-00-

265-7685).

(8) Lock door.

(9) Seal door with tape (7510-00-9169659). NSN 7510-

00-890-9875 may be used as a substitute.

(10) Cushion side panels of canopy with cushioning

(8135-00-601-9212) and close canopy.

(11) Wrap lumber (5510-00-220-6194) (115 x 2 x 4) with

barrier (8135-00-226-3124) and secure with tape

(12) Place lumber across canopy and secure with bolts

(5506-00-951-5699) and flat washers (5310-00-833-

3340).

Louvered Radiator Opening (Front).

(1) Close louvers.

(2) Remove 16 bolts evenly spaced from around louvers to

secure a plywood panel.

(3) Cover louvers with barrier (8135-00-282-0565) and 5/16-

inch plywood (5530-00-618-6955). Drill holes in the

location of missing mounting bolts. Plywood, 3/8-inch

(5530-00-618-6956) may be used as a substitute.

Change 1

B-1-29