Batteries and Cables. - TM-43-01560059

TM 43-0156

Step

Function

Mech

Insp

(3) Rack breakers into place. Block and brace to

cont

prevent movement.

(4) Pack fuses from each cabinet as follows:

(a)

Wrap fuses with barrier (8135-00-226-3124) and place

in plastic bags (8105-00-902-6508) according to

rating. Heat seal or staple bags. Mark bags with

ratings of fuses.

(b)

Place bagged fuses in a fiberboard box (12 x 12 x 4).

(c)

Secure each box to the bottom of each cabinet with

may be used as a substitute.

(5) Coat electrical contacts and terminals with coating

Batteries and Cables.

NOTE

The batteries are on both sides of the engine under the decking

on the electric start generator set. The batteries for the air start

generator set are on one side ony.

(1) Disconnect battery cables and remove the batteries.

(2) Clean and dry the batteries and battery holder.

(3) Install the batteries and connect jumper cables.

Preserve terminals with silicone (6850-00-295-7685).

(4) Preserve the positive and ground cable connectors with

silicone (6850-00-295-7685), cover with barrier (8135-

00-224-8885), and seal with tape (7510-00-266-6715).

Secure the cables to the frame with tape (7510-00-916-

9659). NSN 7510-00-890-9875 may be used asa

Fire Extinguisher. Lock fire extinguisher in bracket and

secure with wire (9505-00-222-3829).

Change 1

B-1-28 1