 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 43-0156
Step
Function
Mech
Insp
2
(2)
Compressor
cont
(a)
Drain normal lubrication oil from crankcase.
(b)
Fill crankcase with MIL-L-21260, type I, grade 30
preservative oil.
(c)
Remove the air cleaner element.
(d)
Atomize spray air intake with MIL-L-21260, type I,
grade 30 preservative oil while manually cranking
engine.
(e)
Atomize spray the interior surfaces of the air
cleaner with MIL-L-21260, type I, grade 30
preservative oil.
(f)
Drain excess preservative.
(g)
Install the element. Wrap air filter with
MIL-B-121 barrier and secure with PPP-T-60 tape.
(h)
Prepare a UU-T-81 tag indicating "CRANKCASE FILLED
TO OPERATING LEVEL WITH PRESERVATIVE OIL GOOD FOR
OPERATION UNTIL FIRST REQUIRED LUBRICANT CHANGE -
DO NOT DRAIN CHECK OIL LEVEL IF LOW, FILL TO
OPERATING LEVEL WITH PROPER LUBRICATING OIL."
(1)
Attach the tag to the compressor.
(3)
Drive Belts and Pulleys
(a)
Remove drive belts.
(b)
Paint unpainted surface of pulley grooves with
TT-P-664 primer.
(c)
Install belts but do not tighten.
(d)
Prepare a UU-T-81 tag indicating "BELT TENSION
RELIEVED, ADJUST PRIOR TO STARTING."
(e)
Attach tag to compressor.
d.
Air Tanks (two).
(1)
Remove access floor panels.
(2)
Open drain valves.
B-1-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals