 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 43-0156
Step
Function
Mech
Insp
2
(8)
Air Start Motor.
cont
(a)
Fill the oiler with MIL-L-21260, type 1, grade 30
preservative oil and reset metering valve.
(b)
Seal all starting motor openings with MIL-T-22085
tape. PPP-T-60, type 4, 4-inch wide tape, may be
used as a substitute.
(9)
Engine Air Filters (two).
(a)
Drain oil.
(b)
Remove filter element and atomize spray interior
of air filter with MIL-L-21260, type I, grade 30
preservative oil.
(c)
Install filter element, Close and secure covers
and seal edges with MIL-T-22085 tape. PPP-T-60,
type 4, 4-inch wide tape, may be used as a sub-
stitute.
(d)
Attach a UU-T-81 tag to the engine control panel
indicating "ENGINE AIR FILTERS DRAINED."
b. Generator. Coat flywheel gear teeth and pinion gear of
starter with MIL-G-10924 grease.
c. Air Compressor (air start model only).
(1)
Engine
(a)
Drain normal lubrication oil.
(b)
Fill with MIL-L-21260, type I, grade 30
preservative oil.
(c)
Remove spark plug.
(d)
Atomize spray 1-1/2 ounces of MIL-L-21260, type I,
grade 30 preservative oil through spark plug
opening while manually cranking the engine.
(e)
Install spark plug.
(f)
Prepare a UU-T-81 tag indicating "CRANKCASE
FILLED TO OPERATING LEVEL WITH
PRESERVATIVE OIL GOOD FOR OPERATION
UNTIL FIRST REQUIRED LUBRICANT CHANGE -
DO NOT DRAIN CHECK OIL LEVEL IF LOW, FILL TO
OPERATING LEVEL WITH PROPER LUBRICATING
OIL."
(g) Attach the tag to the engine.
Change 1 B-1-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals