Terminal Board TB1 Removal and Replacement

TM 32-6110-003-24&P

(6) Refer to figure 5-3. Install RFI filter assembly (6) in the chassis in accordance with paragraph 5-11a

and bottom cover (3) in accordance with paragraph 5-11c.

(7) Refer to section V of this chapter.

k. Terminal Board TB1 Removal and Replacement. Refer to figure 5-3 unless otherwise indicated and

proceed as follows:

(1) Remove top cover (2) and bottom cover (3) in accordance with paragraph 5-10a.

(2) Remove high voltage shield (5) from the chassis in accordance with paragraph 5-10b.

(3) Remove RFI filter assembly (6) in accordance with paragraph 5-10c, steps (1) through (4).

(4) Remove four screws (59), eight flat washers (57), four lock washers (56), and nuts (55) that secure

terminal board (58) to rear of chassis and remove terminal board (58).

(5) Refer to figure 5-5. Tag and remove wires and connecting links (61) from terminal board (58).

(6) Refer to figure 5-5. Replace wires and connecting links (61) as marked and remove tags.

(7) To replace terminal board (58) secure it to rear of chassis with four screws (59), eight flat washers

(57), four lock washers (56), and nuts (55).

(8) Replace RFI filter assembly (6) in accordance with paragraph 5-11a.

(9) Install high voltage shield (5) in the chassis in accordance with paragraph 5-11b, and top cover (2) in

(10) Refer to section V of this chapter.

l. Insulating Strip Removal and Replacement. Refer to figure 5-3 and proceed as follows:

(1) Remove terminal board in accordance with paragraph 5-12j (TB2 and TB3) or 5-12k (TB1). Remove

insulating strip (60).

(2)

To replace insulating strip (60) place it beneath terminal board, then secure terminal board in

accordance with paragraph 5-12j (TB2 or TB3) or 5-12k (TB1).

(3) Refer to section V of this chapter.

5-29