Filter FL6 Removal and Replacement.

TM 32-6110-003-24&P

(2) Remove RFI filter assembly (6) (figure 5-3) from the chassis in accordance with paragraph 5-10c,

steps (1) through (5).

(3) Remove 12 flat-head screws (1) from the filter-mounted side of the RFI assembly. Carefully lift filters

and attached front plate (2) from filter chassis (3).

(4) Tag wires to the filter to be removed for proper identification.

(5) Remove nut (4) and washer (5) that secure terminal lugs (6) to bottom terminal of filter (7).

(6) Remove two nuts (12), lock washers (9) and flat washers (13) that secure filter (7) to filter bracket

(14).

(7) Remove four nuts (15), lock washers (16), and flat washers (17) that secure filter (7) to front plate (2).

(8) To replace filter (7) secure filter to front plate (2) with four nuts (15), lock washers (16), and flat

washers (17).

(9) Secure filter (7) to filter bracket (14) with two nuts (12), and lock washers (9) and flat washers (13).

(10) Secure terminal lugs (6) to bottom terminal of filter (7) with nut (4) and washer (5) as tagged during

removal. Also secure terminal lug (11) to center post of filter with flat washer (10), lock washer (9)

and nut (8).

(11) Carefully insert filters (7) and attached front plate (2) into filter chassis (3). Secure with 12 flat-head

screws (1).

(12) Refer to figure 5-3. Install RFI filter assembly (6) in accordance with paragraph 5-11a.

(13) Refer to figure 5-3. Install bottom cover (3) in accordance with paragraph 5-11c.

(14) Refer to section V of this chapter.

g. Filter FL6 Removal and Replacement. Refer to figure 5-4 unless otherwise indicated, proceed as

follows:

(1) Refer to figure 5-3. Remove bottom cover (3) in accordance with paragraph 5-10a.

(2) Refer to figure 5-3. Remove the RFI filter (6) assembly in accordance with paragraph 5-10c, steps

(1) through (4).

5-26