Section IV. INSTALLATION INSTRUCTIONS

TM 32-5895-227-14&P

NOTE

2-4

CHECKING UNPACKED EQUIPMENT.

Equipment will be reported not ready

Inspect the equipment for damage during

only if components affecting safety

shipment. If the equipment has been damaged, report

or operation are missing.

the damage on SF Form 364, Report of Discrepancy.

Inspect the equipment for modifications.

Check the equipment received against the

Modified equipment will have the MWO number on the

component listings (tables 1-1 and 1-2) and the packing

nomenclature plate. Also inspect for application of

slip. Report all discrepancies .

current MWO's. (Current MWO's applicable to the

equipment are listed in DA PAM 310-4. )

Section IV. INSTALLATION INSTRUCTIONS

2-5 TOOLS, TEST EQUIPMENT, AND MATERIALS

2-6 INSTALLATION AND CONNECTIONS .

See

figure 2-1 and FO-1 for connections in the central

REQUIRED FOR INSTALLATION . Table 2-1 lists

station of the AN/MSQ-71 baseline configuration. Refer

standard tools required for the AN/MSQ-71 baseline

to the particular station specifications for overall

configuration.

Refer to the particular station

configurations.

specifications for overall configuration requirements.

Table 2-1. Installation Tools

Item

Purpose

Applicable publication

Tool Kit, Electronic Equipment TK-100/G

As required for installation.

SC 5180-91-CL-S21

Tool Kit, Electronic Equipment TK-105/G

As required for installation.

SC 5180-91-CL-R07

Multimeter AN/USM-223

Test electrical circuits.

TM 11-6625-654-14

2-2