Connector Panel Removal and Replacement.

TM 32-5865-218-24&P

(11) Replace enclosure in accordance with paragraph 5-11,

step 1.

(12) Refer to section V of this chapter.

e. Connector Panel Removal and Replacement.

Refer to figure 5-9

and proceed as follows:

Remove enclosure (6) in accordance with paragraph 5-11a.

(1)

Remove two screws (14) that secure connector panel (13)

(2)

to standoffs (23).

Cut lacing that secures connector wiring to cable mount

(3)

(2A) secured to back side of connector panel (13).

Remove connector J1 (15) in accordance with paragraph

(4)

5-11f.

Remove terminal stud E1 (18) in accordance with paragraph

(5)

5-11g.

To replace connector panel (13), install terminal stud E1

(6)

in accordance with paragraph 5-11g, then install con-

nector J1 in accordance with paragraph 5-11f.

Use lacing tape (item 17, App. D) to secure connector

(7)

wiring to cable mount (2A). Apply locking compound (item

6, App. D) to threads of screws (14), then use screws to

secure connector panel (13) to standoffs (23).

Replace enclosure (6) in accordance with paragraph 5-11,

(8)

step 1.

Refer to section V of this chapter.

(8)

Refer to figure 5-9 and

f. Connector J1 Removal and Replacement.

proceed as follows:

(1)

Remove enclosure (6) in accordance with paragraph 5-11a.

(2)

Remove four screws (16) and nutring (17) that secure con-

nector (15) to connector panel (13).

Tag and remove wires from connector.

(3)

To replace connector, attach wires as tagged during

(4)

removal, then secure connector to connector panel with

four screws (16) and nutring (17).

Replace enclosure in accordance with paragraph 5-11, step

(5)

5-33