2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
Use care when removing propeller
shaft from yoke.
Bearing cap or
needle bearings may fall out and be
damaged or lost.
(4) Compress and remove propeller shaft (1)
from yokes (4 and 5) while assistant
lowers lifting strap.
(1) Place propeller shaft (1) on clean work
(2) Bend lockstrap (2) tabs out and away from
(3) Remove two scre ws (3) and lockstrap (2)
from each side of yoke (4).
Use care when removing bearing
caps from universal joint and yoke.
Needle bearings and check valves
may fall out and be damaged or lost.
(4) Remove two bearing caps
universal joint (6) and yoke (4).
|Integrated Publishing, Inc.|