 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2350-238-20-2
NOTE
9
Remove
four
hexagon
head
capscrews
The
vehicle
hydraulic
system
is
of
(26), four Iockwashers (27), and two
split-flange clamp halves (28) securing
the open center type and has
three-spool valve pressure tube assembly
pressure only when the hydraulic
(29) to three-spool direct linear valve
pumps are operating.
(11).
Remove four hexagon head capscrews (1),
1
10
Remove
preformed
packing
(30)
from
four Iockwashers (2), and two split-flange
three-spool valve pressure tube assembly
clamp halves (3) securing tube elbow (4)
(29).
to flow divider hydraulic manifold (5).
Remove preformed packing (6) from tube
11
Remove
four
hexagon
head
capscrews
2
elbow
(4).
(31), four Iockwashers (32), and two
split-flange clamp halves (33) securing
three-spool valve to motor tube assembly
Remove four hexagon head capscrews (7),
3
four Iockwashers (8), and two split-flange
(34) to three-spool direct linear valve
(11).
clamp halves (9) securing tube elbow (10)
to three-spool direct linear valve (11).
Remove
preformed
packing
(35)
from
12
three-spool valve to motor tube assembly
Remove
preformed
packing
(12)
from
tube
4
(34).
elbow (10).
Remove
eight
hexagon
head
capscrews
5
(13), eight Iockwashers (14), and four
DISASSEMBLY
split-flange clamp halves (15) securing
two manifold supply nonmetallic tube
Refer to page 2-73 for complete disassembly
assemblies (16 and 17) to slip ring (18).
of all hydraulic lines and fittings.
Remove
two
preformed
packings
(19)
6
from
two
manifold
supply
nonmetallic
tube
lNSPECTION/REPAIR
assemblies (16 and 17).
1
Check for broken, damaged, or missing
Remove
sixteen
hexagon
head
capscrews
7
parts.
(20), sixteen Iockwashers (21), and eight
split-flange halves (22) securing tube
2
Repair
is
by
replacement
of
authorized
elbow (23), three-spool valve pressure
parts
(TM
9-2350-238-24P-2).
tube assembly (24), and two manifold
supply nonmetallic tube assemblies (16
and 17) to flow divider hydraulic manifold
REASSEMBLY
(5).
Refer to page 2-73 for complete reassembly
Remove
four
preformed
packings
(25)
8
of all hydraulic lines and fittings.
from tube elbow (23), three-spool valve
pressure metal tube assembly (24) and
two manifold supply nonmetallic tube
assemblies (16 and 17).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals