 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2350-238-20-2
7 Remove three hexagon head capscrews
NOTE
(18), three Iockwashers (19), three hex-
The
vehicle
hydraulic
system
is
of
agon plain nuts (20), and direct turret
the open center type and has
traverse control linear valve (3).
pressure only when the hydraulic
pumps are operating.
1 Disconnect
control
valve
return
metal
tube
DISASSEMBLY
assembly
(1)
and
control
valve
metal
tube
assembly (2) from direct turret traverse
Refer to page 2-73 for complete disassembly
control linear valve (3) and flow divider
of all hydraulic lines and fittings.
hydraulic manifold (4).
2 Remove four tube nipples
(5)
and
four
INSPECTION/REPAIR
preformed packings (6).
1 Check
for
broken,
damaged,
or
missing
3 Disconnect high pressure metal tube
parts.
assembly (7) from direct turret traverse
control linear valve (3) and flow divider
2 Repair
is
by
replacement
of
authorized
hydraulic manifold (4).
parts
(TM
9-2350-238-24P-2).
4 Remove
tube
nipple
(8)
and
preformed
packing (9).
REASSEMBLY
5 Disconnect
control
valve
output
line
metal
Refer to page 2-73 for complete reassembly
tube assembly (10) and output metal tube
of all hydraulic lines and fittings.
assembly (11) from direct
turret
traverse
control linear valve (3).
6 Remove tube elbow (12), tube fitting
locknut (13), flat washer (14), preformed
packing
(15),
tube
nipple
(16),
and
preformed
packing
(17).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals