 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2350-238-20-2
NOTE
2 Repair
is
by
replacement
of
authorized
The vehicle hydraulic system is of
parts
(TM
9-2350-238-24P-2).
the open center type and has
pressure only when the hydraulic
pumps are operating.
REASSEMBLY
Remove
eight
hexagon
head
capscrews
1
Refer to page 2-73 for complete reassembly
(1), eight Iockwashers (2), and four winch
of all hydraulic lines and fittings.
motor adapter flange clamp halves (3)
securing
manifold
to
nipple
metal
tube
assembly
(4)
and
manifold
to
nipple
metal
INSTALLATION
tube assembly (5) to manifold assembly
counterbalance (6).
Install two new preformed packings (13)
1
and
connect two elbow to winch
control
2
Disconnect two manifold to nipple metal
line
metal tube assemblies (11).
tube assemblies (4 and 5) and remove
two preformed packings (7).
2
Install
two
elbow
to
winch
control
lines
metal tube assemblies (11) to vehicle
Remove
eight
hexagon
head
capscrews
3
drum winch (12) using four winch motor
(8), eight Iockwashers (9), and four winch
adapter flange clamp halves (10), eight
motor adapter flange clamp halves (10)
new Iockwashers (9), and eight hexagon
securing two elbow to winch control line
head capscrews (8).
metal tube assemblies (11) to vehicle
drum
winch
(12).
Install two new preformed packings (7)
3
and connect two manifold to nipple metal
4
Disconnect two elbow to winch control
tube assemblies (4 and 5).
line metal tube assemblies (11) and
remove two preformed packings (13).
4
Install
manifold
to
nipple
metal
tube
assembly (4) and manifold to nipple metal
tube assembly (5) to manifold assembly
counterbalance (6) using four winch motor
DISASSEMBLY
adapter flange clamp halves (3), eight new
Refer
to
for
complete
disassembly
Iockwashers (2), and eight hexagon head
of all hydraulic lines and fittings.
capscrews
(1).
INSPECTION/REPAIR
1 Check
for
broken,
damaged,
or
missing
parts.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals