 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2350-238-20-2
1 Install loop clamp (1), new lockwasher (2),
8 Connect shuttle valve to three-spool
and hexagon head capscrew (3) on
shuttle
valve metal tube assembly (32) and shut-
valve to selector valve metal tube
tle valve to three-spool valve metal tube
assembly (4).
assembly (33) to tow winch brake shut-
tle valve (5).
2 Install
tow
winch
brake
shuttle
valve
(5),
two
new
Iockwashers
(6),
and
two
9 Install two new preformed packings (34).
machine
screws
(7)
on
three-spool
valve
Connect three-spool valve control line
(8).
metal tube assembly (35) and three-spool
valve control line metal tube assembly
3 Install
two
hand
pump
direct
selector
(36).
linear
valves
(9
and
10)
with
two
hexagon
head capscrews (11), two new lock-
10 Secure
three-spool
valve
control
line
washers (12), and two hexagon plain nuts
metal tube assembly (35) and three-spool
valve control line metal tube assembly
(13). Install new preformed packing (14),
flat washer (15), new tube fitting locknut
(36) to three-spool valve (8) with four
(16), and tube elbow (17) on hand pump
counterbalance manifold three-spool
direct selector linear valve (10).
valve flange clamp halves (37), eight
new Iockwashers (38), and eight hex-
4 Install
new
preformed
packing
(18),
flat
agon head capscrews (39).
washer (19), new tube fitting locknut
11 Install
two
new
preformed
packings
(40).
(20), and tube elbow (21) connecting out-
board selector valve metal tube assembly
Connect two adapter to manifold
hydraulic winch metallic tubes (41) to
(22)
to
winch
control
cylinder
(23).
manifold assembly counterbalance (42).
5 Install two new preformed packings (24)
and two tube
nipples (25) connecting
12 Install two new preformed packings (43)
shuttle valve
to selector valve metal tube
and two new preformed packings (44).
assembly (4)
to tow winch brake shuttle
Secure elbow to adapter metal tube
valve (5) and
hand pump direct selector
assembly (45) and elbow to adapter con-
linear valve (10).
trol line metal tube assembly (46) to two
adapter to manifold hydraulic winch
6 Install two new preformed packings (26)
metallic tubes (41) with two tow winch
and two tube reducers (27) on tow winch
counterbalance manifold clamp pipe
brake shuttle valve (5).
flanges (47), four counterbalance
manifold three-spool valve flange clamp
7 Install
two
new
preformed
packings
(28),
halves (48), eight new Iockwashers (49),
two flat washers (29), two new tube fit-
and eight hexagon head capscrews (50).
ting locknuts (30), and two tube elbows
(31) on three-spool valve (8).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals