|
|
TM 9-2350-238-20-2
2-4.
SERVICE
UPON
RECEIPT
OF
MATERIEL
(CONT).
and Spare Engines). This tag is in the driver's
compartment attached to the steering bar, shift
Dry cleaning solvent (SD2) is toxic
lever, or MASTER switch, For vehicles from
and flammable. Wear protective gog-
administrative storage, check DA forms in vehicle
gles and gloves and use only in well-
log book to determine vehicle readiness. Fill fuel
ventilated areas.
cell and radiators and lubricate vehicle as
specified, refer to page 2-8.
c. Most armament parts received from storage
are coated with rust-preventive compound. Clean
NOTE
these parts thoroughly with shop rags or a brush
Engine,
transmission, and
final
that is saturated with dry cleaning solvent (SD2)
drives will not be drained unless ex-
(item 10, appx C). Then lubricate the parts as
pected temperatures require different
specified, refer to page 2-8.
viscosity oil. New engines and
transmissions contain CLP (item 5,
NOTE
Component parts of each vehicle
the next regularly scheduled oil
should be cleaned separately when-
change. General purpose lubricating
ever possible. Although like parts are
oil (item 14, appx C) may be added
interchangeable, the parts originally
to CLP (item 5, appx C) to maintain
assembled work best together.
proper oil level.
d. Whenever
possible,
the
vehicle
crew
f. V e h i c l e s
prepared
for
shipment
by
the
will help do these services.
manufacturer require
additional
services,
refer
to Table 2-1.
Follow all precautions to tag DD Form
e.
1397 (Processing and Deprocessing Record
for Shipment, Storage, and Issue of Vehicle
Table 2-1. SERVICE UPON RECEIPT OF MATERIELM578 RECOVERY VEHICLE
REMARKS
ACTION
LOCATION
ITEM
Protective
M578
a.
Remove
vehicle
closure
kit.
Recovery
Covers
Vehicle
b.
Remove
seal
securing
driver's
cupola
cover
and
open
cover.
c.
Check tag DD Form 1397 (Processing
and Deprocessing Record for Shipment,
Storage, and Issue Vehicle and Spare
Engines) to determine level of process-
ing, and follow all precautions.
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |