 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
DISASSEMBLY
4 Remove nonmetallic channel (15) from
1 Remove two hexagon plain nuts (1), two
base (6).
flat washers (2), two machine screws (3),
two hexagon plain nuts (4), and two flat
5 Remove two nonmetallic grommets (16)
washers (5) from base (6).
from base (6).
2 Remove four self-locking nuts (7), four
6 Remove tape strip (17) from base (6).
machine screws (8), four flat washers (9),
and two heater brackets (10) from base
7 Remove seals (18), and tape strips (19)
(6).
from tape strip (17).
3 Remove 12 self-locking nuts (11), 12
machine screws (12), 12 flat washers (13),
and 4 hull brackets (14).
INSPECTION/REPAIR
3 If base is damaged, repair is by
1 Inspect for broken, damaged, or missing
replacement of next higher assembly.
parts.
4 Repair is by replacement of authorized
2 Seals and tape strips are manufactured
parts (TM 9-2350-238-24P-1) which do not
items. Refer to appendix D.
meet inspection criteria.
2-1143
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals