 |
|||
|
|
|||
|
Page Title:
MAINTENANCE OF CRANE OPERATOR'S BASE ASSEMBLY. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-199. MAINTENANCE OF CRANE WINDOW ASSEMBLY (CONT).
REASSEMBLY (CONT)
Install window assembly to windshield
8
assembly fastener (23), two flat washers
(24), two machine screws (25), and two
new self-locking nuts (26).
Install two window catch pads (27), four
9
new Iockwashers (28), and four machine
screws (29).
Install two window assembly to windshield
10
assembly cylinder fasteners (30), four new
Iockwashers (31), and four machine
screws (32).
Install cover assembly (33), window
11
assembly retaining strip (34), five new
Iockwashers (35), five hexagon head
capscrews (36), and five hexagon plain
nuts (37) on frame (4).
2-200. MAINTENANCE OF CRANE OPERATOR'S BASE ASSEMBLY.
c. Reassembly
b. Inspection/Repair
a. Disassembly
This task covers:
INITIAL SETUP
Equipment Conditions
Materials/Parts
2-1111 Crane operator's base assembly
Adhesive (item 5, appx C)
removed
Dry cleaning solvent (item 16, appx C)
Flint abrasive paper (item 2, appx C)
General Safety Instructions
Nonmetallic channel (figure D-11, appx D)
Seal (figure D-14, appx D)
Self-locking nut (16)
Tape strip (figure D-12, appx D)
Dry cleaning solvent (SD2) is toxic
Tape strip (figure D-13, appx D)
and flammable. Wear protective
goggles and gloves and use only in a
References
well-ventilated area.
TM 9-2350-238-24P-1
2-1142
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals