INSPECTION/REPAIR - TM-9-2350-238-20-11159

TM 9-2350-238-20-1

8 R e m o v e cotter pin (22), hinge to base pin assembly (23), three machine screws (24), three flat

washers (25), three self-locking nuts (26), and lower half of windshield to base butt hinge (27).

9 R e m o v e cotter pin (28), hinge to base pin assembly (29), two machine screws (30), two flat

washers (31), two self-locking nuts (32), and lower half of windshield to base butt hinge (33).

10 Remove vehicular window (34) from base assembly (35).

11 Remove three machine screws (36), three flat washers (37), three self-locking nuts (38), and

upper half of windshield to base butt hinge (39).

12 Remove two machine screws (40), two flat washers (41), two self-locking nuts (42), and upper

half of windshield to base butt hinge (43).

13 Remove four hexagon head capscrews (44), four Iockwashers (45), and base assembly (35).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 Crane window assembly is a repairable assembly. Refer to page 2-1138.

3 Windshield wiper motor is a repairable assembly. Notify direct support maintenance.

4 Vehicular window is a repairable assembly. Refer to page 2-1081.

5 Base assembly is a repairable assembly. Refer to page 2-1142.

6 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-1133