|
|
TM 9-2350-238-20-1
2-198. MAINTENANCE OF CRANE OPERATOR'S ENCLOSURE KIT--ENCLOSURE
(CONT).
1 Remove wiper blade clip (1) and wind-
shield wiper arm (2) from windshield wiper
motor (3). Remove windshield wiper
blade (4) from windshield wiper arm.
NOTE
Nut, Iockwasher, and washer are
supplied with the windshield wiper
motor. Use care not to lose or
damage these components.
2 Remove nut (5), Iockwasher (6), and
washer (7) from windshield wiper motor
(3).
NOTE
The cover on the windshield wiper
motor must be removed to gain
access to some of the windshield
wiper motor attaching hardware.
3 Remove six machine screws (8), six lock-
washers (9), and cover (10) from wind-
shield wiper motor (3).
4 Remove machine screw (11), flat washer
(12), windshield wiper motor (3), and three
flat washers (13).
2-1130
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |