|
|
TM 9-2350-238-20-1
2-192. MAINTENANCE OF OIL RESERVOIR HEATER KIT AND ELECTRICAL WIRING
(CONT).
REMOVAL (CONT)
10 Remove assembled washer screw (15)
6 Tag and disconnect plug connectors of
and spring tension clip (14) from angle
relay and disconnect to slave receptacle
bracket (16).
special cable assembly (10), relay to
heating element electrical lead (1), and
11 Remove two hexagon plain nuts (17), two
overheat thermostat to relay branched
lockwashers (18), two machine bolts (19),
wiring harness (2) from immersion heater
and angle bracket (16).
relay and housing (11). Remove relay to
heating element electrical lead.
electrical lead (3) from slave receptacle
7 Tag and disconnect shell connector of
connector (20). Remove heating element
overheat thermostat to relay branched
to slave electrical lead.
wiring harness (2) from relay and
disconnect to slave receptacle special
cable assembly (10). Remove overheat
receptacle special cable assembly (10)
thermostat to relay branched wiring
from slave receptacle connector (20).
harness.
Remove relay and disconnect to slave
receptacle special cable assembly.
8 Remove hexagon head capscrews (12),
two lockwashers (13), and immersion
14 Remove four machine bolts (21), four
heater relay and housing (11).
lockwashers (22), and slave receptacle
connector (23) from outside of cab.
9 Remove shell connector of relay and
disconnect to slave receptacle special
cable assembly (10) from spring tension
clip (14).
2-1090
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |