Removal of Bulkheads Disconnect to Circuit Breakers and Electrical Components Branched Wiring Harness

TM 9-2350-238-20-1

2-182. MAINTENANCE OF HEATER INSTALLATION KIT--ELECTRICAL WIRING (CONT).

Failure to remove or disconnect batteries before removing or installing any electrical

lead or wiring harness may result in injury or damage to equipment.

NOTE

Tag all electrical leads during removal to aid in installation.

1 Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc. Remove only the hardware which secures the harness or lead being

removed.

2 Tag and disconnect coolant heater circuit breaker to line disconnect special cable assembly (1)

from coolant heater circuit breaker (2) and bulkhead disconnect to circuit breakers and electrical

components branched wiring harness (3).

Failure to remove or disconnect batteries before removing or installing any electrical

lead or wiring harness may result in injury or damage to equipment.

2-1042