|
|
TM 9-2350-238-20-1
1 Install air intake grille radiator fabric cover (1) on vehicle, and secure with 36 flat washers (2)
and 12 snap fastener studs (3).
NOTE
Use screws retained during removal to secure mechanical guard to hull.
2 Install mechanical guard (4) to hull, and secure with eight screws (5).
3 Install air intake cover (6) to side of hull, and secure with three flat washers (7), three machine
bolts (8), and three new self-locking nuts (9).
4 Install two battery compartment air intake port access covers (10), and secure with eight new
Iockwashers (11) and eight hexagon head capscrews (12).
intake, and secure with two new Iockwashers (15) and two machine screws (16).
6 Reach through screen and install three port cover retaining bracket plates (17). Secure three
port cover retaining bracket plates to exhaust port cover (18) with three flat washers (19) and
three hexagon head capscrews (20).
7 Reach through screen and install four port cover retaining bracket plates (21). Secure four port
cover retaining bracket plates to exhaust cover assembly (22), using four flat washers (23) and
four hexagon head capscrews (24).
8 Reach through screen (25) and install seven port cover retaining bracket access covers (26).
Install seven hull exhaust port cover brackets (27), and secure with seven flat washers (28) and
seven hexagon head capscrews (29).
9 Reach through screen (30) and install two heater exhaust outlet plate access covers (31),
Install two heater exhaust outlet cover plates (32), and secure with two flat washers (33) and
two hexagon head capscrews (34).
10 Install strap fastener loop (35), and secure with two machine screws (36).
11 Pull exhaust cover assembly (22) down and fasten four clasps (37).
12 Pull exhaust port cover (18) down and fasten three clamps (38).
13 Secure exhaust port cover (18) and exhaust cover assembly (22) with nylon cord (39).
2-1039
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |