|
|
TM 9-2350-238-20-1
2-158. MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS
(LEFT SIDE) AND ATTACHING HARDWARE (CONT).
REASSEMBLY/INSTALLATION (CONT)
49 Install tube nipple (59) and preformed
43 Install tube assembly (51) on lockout
packing (58) on lockout cylinder (60).
switch tee (49).
50 Install hose assembly (61) on tube nipple
44 Install three loop clamps (52), three
(59).
retaining straps (53), six new Iockwashers
(54), and six screws (55) on tube
51 Connect hose assembly (61) to lockout
assemblies.
switch tee (57).
45 Install new tube fitting locknut (56) on
52 Tighten tube fitting locknut (56) on lockout
lockout switch tee (57).
switch tee (57).
46 Install lockout switch tee (57) with tube
53 Install tube assembly (62) on lockout
fitting locknut (56) on bulkhead.
switch tee (57).
47 Connect tube assembly (51) to lockout
swifch tee (57).
48 Install new preformed packing (58) on tube
nipple (59).
2-916
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |