MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS (RIGHT SIDE) AND ATTACHING HARDWARE.

TM 9-2350-238-20-1

2-156. MAINTENANCE OF SUSPENSION LOCKOUT SYSTEM CONTROL VALVE AND

ASSOCIATED PARTS (CONT).

INSTALLATION (CONT)

Install new tube fitting locknut (60) on tube

elbow (61).

Install new preformed packing (62) and

packing retainer (63) in selector control

plug valve (44). Install tube elbow (61) in

selector control plug valve, and tighten

tube fitting locknut (60).

Connect metal tube assembly (39) to tube

elbow (61 ).

2-157. MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS

(RIGHT SIDE) AND ATTACHING HARDWARE.

b. Inspection/Repair

c. Installation

This task covers:

a. R e m o v a l

INITIAL SETUP

Materials/Parts

General Safety Instructions

Locknut (5)

Locknut (2)

Lockwasher (9)

To avoid injury to personnel, do not

Preformed packing (4)

Preformed packing (2)

tighten or loosen hydraulic fittings

when system is pressurized.

References

Lower the boom to stowed position

TM 9-2350-238-20-2

TM 9-2350-238-24P-1

before doing any maintenance on

hydraulic system.

Equipment Conditions

Wipe up any spilled hydraulic fluid to

2-382 Powerplant removed

prevent injury to personnel.

2-918 Access cover removed

2-923 Cover plate removed

Equipment stowage box removed from cab

well (TM 9-2350-238-20-2)

2-894