Reassembly - TM-9-2350-238-20-10902

TM 9-2350-238-20-1

2-151. MAINTENANCE OF VEHICULAR TRACK SHOE INSTALLATION AND

VEHICULAR TRACK SHOE (CONT).

NOTE

Procedures are written for one track

shoe, but apply to all track shoes.

1 If removed, install track shoe pad (1) and

new self-locking nut (2) on shoe assembly

(3). Tighten self-locking nut to 180 ft-lb

(244 N-m).

NOTE

Steps 2 and 3 apply to reassembly of

track shoe when track is removed

from vehicle.

2 Position track shoe (4) on track (5). Install

track shoe link pin (6) in track shoe (4).

3 Install two new self-locking nuts (7) on

track shoe link pin (6). Tighten self-

Iocking nuts to 180 to 200 ft-lb (218 to 272

N-m).

2-876