|
|
TM 9-2350-238-20-1
25
Remove preformed packing (35), packing retainer (34), and locknut (33) from tube elbow (31).
26
Loosen locknut (36) on tube elbow (32). Remove tube elbow with locknut, packing retainer
(37), and preformed packing (38) from impact wrench control (9).
Remove preformed packing (38), packing retainer (37), and locknut (36) from tube elbow (32).
27
28
Remove two hexagon head capscrews
(39), two Iockwashers (40), and spade
control direct linear valve (41) from flow
regulator manifold (42).
29
Remove four hexagon head capscrews
(43), four Iockwashers (44), impact wrench
regulator ball valve (45), and two pre-
formed packings (46) from flow regulator
manifold (42).
Remove quick disconnect cap (47) from
30
coupling half (48).
31
Remove coupling half (48) and retaining
ring (49) from flow regulator manifold (42).
Remove retaining ring (49) from chain on
32
quick disconnect cap (47).
Remove quick disconnect cap (50) from
33
coupling half (51 ).
34
Remove coupling half (51) and retaining
ring (52) from flow regulator manifold (42).
Remove retaining ring (52) from chain on
35
quick disconnect cap (50).
Remove regulator valve knob (53) from
36
impact wrench regulator ball valve (45).
2-785
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |