|
|
TM 9-2350-238-20-1
2-135. MAINTENANCE OF IMPACT WRENCH CONTROL HYDRAULIC LINES AND
FITTINGS AND IMPACT WRENCH REGULATOR BALL VALVE (CONT).
REMOVAL/DISASSEMBLY (CONT)
16 Disconnect metal tube assembly (23) from tube elbow (24).
Remove metal tube assembly (23) from check valve (25).
17
Loosen locknut (26) on tube elbow (24). Remove tube elbow with locknut, packing retainer
18
(27), and preformed packing (28) from impact wrench control (9).
19
Remove preformed packing (28), packing retainer (27), and locknut (26) from tube elbow (24).
Remove check valve (25) with preformed packing (29) from impact wrench control (9).
20
Remove preformed packing (29) from check valve (25).
21
22
Disconnect metal tube assembly (30) from tube elbow (31).
Remove metal tube assembly (30) from tube elbow (32).
23
Loosen locknut (33) on tube elbow (31). Remove tube elbow with locknut, packing retainer
24
(34), and preformed packing (35) from impact wrench control (9).
2-784
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |