|
|
TM 9-2350-238-20-1
2-131. MAINTENANCE OF AUXILIARY DRIVE ASSEMBLY (VEHICULAR DRIVE) (CONT).
DISASSEMBLY
1 Remove machine plug (1) and preformed packing (2) from vehicular drive (3). Drain hydraulic
fluid from clutch into drain pan.
2 Remove machine plug (4) and preformed packing (5) from vehicular drive (3).
3 Remove liquid gage rod-cap (6) and preformed packing (7) from attached gage rod clutch tube
(8) .
1 Inspect for broken, damaged, or missing parts.
2 For further disassembly, notify direct support maintenance.
3 Repair by replacement of authorized parts (TM 9-2350-238-24P-1).
1 Install new preformed packing (7) and liquid gage rod-cap (6) into attached gage rod clutch tube
(8) .
2 Install new preformed packing (5) and machine plug (4) in vehicular drive (3).
new preformed packing (2) and machine plug (1) in vehicular drive (3).
2-770
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |