 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-129. MAINTENANCE OF FINAL DRIVE ASSEMBLY (CONT).
1 Install two plugs (1), bolt (2), and pin (3) in final drive assembly (4).
2 Install two headless shoulder pins into holes located 180 degrees apart.
3 Install final drive lifting sling by inserting sling dowel into bolt mounting hole and placing lifting
eye (5) over stud (6). Install nut (7) on stud (6).
4 Install shaft nut (8) and lock ring (9).
5 Clean hull-to-final drive mating surfaces (10) with dry cleaning solvent and wire brush. Dry with
low-pressure compressed air.
6 Coat mating surfaces (10) with sealing compound.
7 Attach hoist to final drive lifting sling.
8 Install final drive (4) using hoist. Guide into position on hull using headless shoulder pins.
2-764
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals